Views:0 Author:Site Editor Publish Time: 2020-08-31 Origin:Site
"CANLON" brand MBP-Pro is polymer self-adhesive pre-applied waterproof membrane, comprised of white polymer sheet (HDPE or TPO), pressure sensitive adhesive, and trafficable weather resistant granular layer. Below we will introduce in detail the following guide on MBP-Pro Pre applied Waterproofing.
This article consists of 2 parts
1. Production instructions
2. The whole system and supporting auxiliary materials
"CANLON" brand MBP-Pro is polymer self-adhesive pre-applied waterproof membrane, comprised of white polymer sheet (HDPE or TPO), pressure sensitive adhesive, and trafficable weather resistant granular layer. The side lap is self-adhesive type and it has a layer of factory lap on the back side of membrane.
The trafficable weather resistant granular layer has the functions of effectively protecting pressure sensitive adhesive layer and preventing the stick. The backside factory lap can enhance the application of the construction and significantly improve the overlapping strength. In the more extreme construction condition (such as rains, water, low temperature, etc.), it can also achieve effective connection on factory laps.
The construction of the membrane adopts the pre-applied method, which can realize a full bonding with the post-casted concrete and avoid the water migration.
2、The whole system and supporting auxiliary materials
MST-105 Detail strip
Detail strip is composed of white HDPE sheet, polymer adhesive and release liner, it can be used for end laps connection.
MST202 double-sided tape
Double side tape is composed of polyester, polymer adhesive and release liner, it can be used for end laps connection, transition area connection between membranes of different types
MST105 sanded tape
Sanded tape is composed by cross laminated HDPE,polymer adhesive, release liner and granular layer, it can be used for repair of broken areas, holes on pre applied membrane, or enhancing the connection of overlapping;
PUS polyurethane sealant
Used for sealing of joint parts such as pile heads and anti-floating anchors;
The waterproof layer is sealed at the end;
Joint processing such as expansion joints;
Through the above two introductions, have you already learned some information about our MBP-Pro Pre applied Waterproofing Membrane? If you want to know more about MBP-Pro Pre applied Waterproofing Membrane, please visit our website.