 |
| Quantity: | |
|---|---|
SBS Elastomer Modified Bitumen Waterproofing Membrane
Description
CANLON SBS elastomer-modified bitumen membrane is a sheet-like waterproof material that can be curled, with polyester felt as a base, and uses styrene-butene styrene (SBS) modified bitumen as a coating and covered with polyvinyl film (PE), fine sand (S), mineral pellets (M) and other insulating materials. Compared with APP plastomer-modified bitumen waterproofing membrane, it has better low-temperature resistance performance.
Specification
| Thickness(mm) | Width(m) | Length(m) |
| 3 | 1 | 10 |
| 4 | 1 | 7.5/10 |
Product Features
1. Adapt to the Deformation and Cracking of the Substrate
High tensile strength, suitable for shrinkage deformation and cracking of the substrate.
2. Outstanding Low Temperature Resistance
It has good low-temperature resistance and can be used in cold areas.
3. Excellent Physical Properties
Good puncture resistance, tear resistance, and fatigue resistance.corrosion resistance, mildew resistance, and crack resistance.
Classification
According to material properties, it is divided into:
Type I, Type II
According to the above surface isolation material is divided into:
Polyethylene film (PE), fine sand (S), mineral pellets (M)
Lower surface isolation materials are:
Fine sand (S), Polyethylene film (PE)
Application
1. Waterproofing of underground and roofing engineering of industrial and civil buildings.
2. If for exposed use, the waterproofing membrane whose upper surface insulation material should be mineral granules.
Accessories
WBR300 Primer
SBS Elastomer Modified Bitumen Waterproofing Membrane
Description
CANLON SBS elastomer-modified bitumen membrane is a sheet-like waterproof material that can be curled, with polyester felt as a base, and uses styrene-butene styrene (SBS) modified bitumen as a coating and covered with polyvinyl film (PE), fine sand (S), mineral pellets (M) and other insulating materials. Compared with APP plastomer-modified bitumen waterproofing membrane, it has better low-temperature resistance performance.
Specification
| Thickness(mm) | Width(m) | Length(m) |
| 3 | 1 | 10 |
| 4 | 1 | 7.5/10 |
Product Features
1. Adapt to the Deformation and Cracking of the Substrate
High tensile strength, suitable for shrinkage deformation and cracking of the substrate.
2. Outstanding Low Temperature Resistance
It has good low-temperature resistance and can be used in cold areas.
3. Excellent Physical Properties
Good puncture resistance, tear resistance, and fatigue resistance.corrosion resistance, mildew resistance, and crack resistance.
Classification
According to material properties, it is divided into:
Type I, Type II
According to the above surface isolation material is divided into:
Polyethylene film (PE), fine sand (S), mineral pellets (M)
Lower surface isolation materials are:
Fine sand (S), Polyethylene film (PE)
Application
1. Waterproofing of underground and roofing engineering of industrial and civil buildings.
2. If for exposed use, the waterproofing membrane whose upper surface insulation material should be mineral granules.
Accessories
WBR300 Primer