FOCUS ON WATERPROOFING AND ROOFING
MBP C Polymer Cement Membrane
Home » Products » Waterproofing » Below Grade » MBP C Polymer Cement Membrane

Product Category

Contact Us

Let’s Get In Touch

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button

MBP C Polymer Cement Membrane

MBP C is a superior cement modified polymer waterproofing material for below ground waterproofing of reinforced concrete structures. It is loose laid onto prepared substrates or formwork before fixing reinforcement and casting concrete.
Availability:
Quantity:
  • MBP C

  • CANLON


MBP C

Polymer cement membrane for TPO pre- and post-applied fully bonded below ground waterproofing

PRODUCT DESCRIPTION

MBP C is a superior cement modified polymer waterproofing material for below ground waterproofing of reinforced concrete structures. It is loose laid onto prepared substrates or formwork before fixing reinforcement and casting concrete.

USES

MBP C is used for damp-proofing, waterproofing and concrete protection for basements and other below ground concrete structures.

Suitable for use on cast-in-situ, precast, and existing reinforced concrete structures.

CHARACTERISTICS/ADVANTAGES

• Forms a strong, lasting bond with concrete.

• Effectively prevents water migration.

• Demonstrates excellent watertightness.

• Withstands harsh conditions robustly.

• Easily integrates with other approved systems.


PRODUCT INFORMATION

Packaging

1.0 x 20 m

Thickness

1.2mm

Weight

1.5kg /m2

Shelf Life

18 months shelf life from date of production

Storage conditions

Product must be stored in original unopened and undamaged sealed packaging in dry conditions and temperatures between 40 °F (+5 °C) and 86 °F (+30 °C). Store in a horizontal position. Do not stack pallets of the rolls on top of each other, or under pallets of any other materials during transport or storage. Always refer to packaging.


PRODUCT PROPERTIES

Property

Value

Test method

Thickness/mm

≥1.2

EN1849-2:2019

Tensile force

(N/50mm)

Longitudinal

≥600

EN12311-2:2013

(Method A)

Transverse

≥600

EN12311-2:2013

(Method A)

Elongation at break /%

Longitudinal

≥500

EN12311-2:2013

(Method A)

Transverse

≥500

EN12311-2:2013

(Method A)

Resistance to tearing (N)

Longitudinal

≥250

EN12311-2:2018

Transverse

≥250

EN12311-2:2018

Shear Resistance to of Joints (N/50mm)

≥300

EN12317-2:2010

Resistance to Static Loading

20kg,no leakage

EN12730:2015

Resistance to Impact(mm)

1500

EN12691:2018

Water-tightness

There is no pressure drop during the test

EN 1928:2000

Durability against Aging

There is no pressure drop during the test

EN 1926:2000

EN 1847:2009

Durability against chemicals

There is no pressure drop during the test

EN 1928:2000

EN 1847:2009

BASIS OF PRODUCT DATA

All technical data stated in this Product Data sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.

APPLICATION INSTRUCTION

Pre-Applied

The MBP C membrane needs to be affixed to a suitably stable base to prevent displacement during construction activities. The base surface should be smooth, consistent, and free from debris. Any large gaps and cavities (≥ 0.5 in) must be filled before the membrane is installed. The base can be slightly damp or moist, but standing water should be prevented. Appropriate substrates for fixing the membrane are:

• Concrete blinding

• Formwork

• Rigid thermal insulation

• Plywood sheets/forms

• Well-compacted soil

Post-Applied

The MBP C post-applied system is to be applied on concrete that has set (≥ 48 hours post-pouring). Any weak sections of concrete, protrusions, existing coatings, etc., should be removed to attain a clean, fine-gripping profile devoid of dirt, loose particles, grease, formwork release agents, oil, and any other surface contaminants.

MBP C is loose laid onto prepared substrates or formwork before fixing reinforcement and casting concrete. A special hybrid bonding layer on the membrane forms a permanent bond with the fresh concrete. Overlap joints are sealed using cold-applied tapes.

LOCAL RESTRICTIONS

Note that as a result of specific local regulations the declared data and recommended uses for this product may vary from country to country, consult the local Product Data Sheet for exact product data and uses.


Previous: 
Next: 
Follow Us:

Products & Solutions

Phone: +86-18861303997
Tel: +86-512-63809938
WhatsApp: 0086-15510097814
Email: albert@canlon.com
Address: No.8, Hengtong Rd, Qidu Town, Wujiang Dist, Suzhou City, 215234, China

Copyright  2024 Jiangsu Canlon Building Materials Co.,Ltd. All Rights Reserved.  苏ICP备11076726号-3

Privacy PolicySiteMap