CANSHIELD SA300 Modified Bitumen Membrane

PRODUCT NUMBERS:

·10030202-3.0mm x 1.0m x 10.0m - Roll

PRODUCT DESCRIPTION & FEATURES:  

CANSHIELD^TM SA300 is an  self-adhered SBS-modified bitumen sheet membrane for use in approved multi-ply membrane waterproofing assemblies. CANSHIELD SA300 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with polyolefin film and underside is surfaced with a silicone release film that is removed during application.

Basic USES:

CANSHIELD^TM SA300 can be applied to non-exposed course, underground and indoor  engineering of various buildings, as well as waterproofing works such as open-excavation subways, tunnels, pools, and canals, especially for waterproofing works that open flames are not allowed.

APPLICATION:

·Prior to installation, unroll CANSHIELD^TM SA300 onto  the deck and allow to relax. Place CANSHIELD^TM SA300 in desired position and back roll the product. Apply approved adhesive or primer following manufacturer specifications. CANSHIELD^TM SA300 is then placed into the 

·adhesive or primer and rolled with a weighted roller to ensure adhesion.

·Refer to Canlon’s published technical literature for additional details and application requirements.

Limitation:

·Do not apply to contaminated, wet, or damp surfaces.

·Primer may be needed

STORAGE:

·Store rolls in an upright position to prevent damage. Store in a clean, dry location and cover as necessary to protect from environmental damage such as extreme cold, heat or moisture.

STESTING ＆ APPROVALS

·According to the Chinese National Standard GB 23441 《Self-adhering polymer modified bituminous waterproof sheet》

TECHNICAL INFORMATION & TESTING:

*Coverage rate as reported assumes installation using side and end lap recommendations.

*Data is represented by minimal values, unless noted otherwise